Payment & Shipping Terms:
|Material:||FTR Is A New Lightweight Foaming Elastomeric Composite Material Which Is A Kindly Of Thermoplastic Foaming Rubber.||Feature:||This Material Has A Good Performance: It Has Characteristics Such As Light Weight, Environment Friendly, High Elasticity, Anti-abrasive, Good Cold Resistance And Weatherability.|
|Characteristic:||It Has Appearance Of The Rubber, And Dual Density With Two Colors, Easy Molding And Process.||Application:||It Is Is Mainly Applied To Outsole And Insole Of Sports Shoes, Fashion Leisure Shoes, Child’s Footwear Etc.|
|Low Density:||The Density Of FTR Is Between0.65-0.8g/cm3. It Also Can Be Adjusted The Density According To Requirements.|
thermoplastic elastomer compound,
rubber molding compound
Foaming thermalplastic rubber FTR , lightweight thermoplastic rubber , synthetic thermoplastic material
FTR is a new lightweight foaming elastomeric composite material which is a kindly of thermoplastic foaming rubber. This material has a good performance: it has characteristics such as light weight, environment friendly, high elasticity, anti-abrasive, good cold resistance and weatherability. It has appearance of the rubber, and dual density with two colors, easy molding and process.
This material is mainly applied to outsole and insole of sports shoes, fashion leisure shoes, child’s footwear etc.
Characteristic of FTR:
|Characteristic of foaming thermoplastic rubber FTR||Low density: The density of FTR is between0.65-0.8g/cm3. It also can be adjusted the density according to requirements.|
|Hardness: 10-65 Shore A.|
|Abrasion resistance: FTR can reach the level of DIN ≤ 200mm3|
|Non-yellowing: (anti-ultraviolet) ≥Level 4|
|Slip resistance: Dry slip ≥1.3, wet slip≥ 0.45|
|Ross flexing resistance:
At 23 deg.C after 60000 cycles: No significant increase in length of the initial cut (15mm).
At -20 deg.C after 60000cycles: No significant increase in length of the initial cut (15mm).
|Tensile strength: More than 800kpa (8kgs)|
|Elongation at break: More than 500%|
|Compressive deformation: Compression set≤ 50%|
|.Environment friendly: Reach the highest environmental protection standards of USA and Europe.|
|Easy molding and process: Using the same shooting-out machine of TPR or air-blow machine of PVC.|
|Recycling: All leftover materials are recyclable.|
|Glue: Easy injection molding.|
FTR reaches the below standards (Europe):
Heavy metal contends
LFGB Section 30
FTR reaches the below standards (USA):
Heavy metal contends